```html

A good swimming pool cleaning service in Chandler, AZ has to do more than skim the top and leave. Newer Chandler pools often come with tanning ledges, attached spas, and waterfalls, and each one gives dirt, calcium, and algae another place to hide.

At Roadrunner Pool Service, we clean a lot of these feature-rich pools. Below, we walk through what a proper visit does on ledges, spa walls, spillover lips, and feature basins. These are the spots a quick skim-and-go tends to miss.

Want a price for your pool? Call 602-460-2221 for a free quote.

 

Why Feature-Rich Pools Need More Than a Skim

Every feature adds surface area, corners, and water that moves differently from the main pool. Those areas collect fine dust and grow algae on their own timeline. A plain rectangle pool and a pool with a ledge, spa, and waterfall are not the same job.

In master-planned neighborhoods like Ocotillo and Fulton Ranch, we see many pools with two or three features in one backyard. Newer construction in south Chandler often follows the same pattern. That is why our visits for these pools are built around the features, not just the main basin.

 

Tanning Ledges: Shallow Water, Fast Algae

A tanning ledge, also called a baja shelf, holds only a few inches of water. That shallow water sits in full sun most of the day. In our experience, it is often the first place algae shows up in a pool that otherwise looks clean.

Brushing shallow shelves and umbrella sleeves

Good tanning ledge cleaning starts by hand. Automatic cleaners often skip ledges or cannot reach them, so we brush the whole ledge, edge to edge, and push the debris toward the deep water where the filter can catch it.

Many ledges also have an umbrella sleeve, the small round hole that holds an umbrella pole. Leaves and grit settle in there, and so does algae. We clear the sleeve and brush around its rim on our visits.

Sun exposure and chlorine burn-off on ledges

Shallow water tends to warm up faster and lose chlorine faster than deep water. Even in cooler months, a ledge in direct sun can lag behind the rest of the pool. We watch the ledge closely and keep the whole pool balanced so the shallow end is not left short.

If you see a green or brown tint on the ledge between visits, a quick brush pushes it into circulation. Let us know on your next visit so we can adjust.

 

Attached Spas and Spillover Edges

An attached spa is really a second small pool. It has its own walls, its own seats and steps, and often a spillover lip that drops water into the main pool. Each of those needs its own brushing.

• Spa walls and benches: We brush seats, steps, and the floor, where body oils and sunscreen tend to collect.

• Waterline tile: Spa tile can build a ring faster than pool tile because the water level and temperature shift more often.

• Spillover lip: Water spreads thin across this edge and dries in the sun. That can leave white mineral lines over time.

Valley tap water is hard, so calcium lines on spillover lips are a common sight. Regular brushing and balanced water help slow that buildup. Heavy scale that has set in may need a separate tile cleaning, and we will tell you if we think it does.

 

Waterfalls and Feature Basins

Waterfalls, sheer descents, and rock features look great, but they create splash zones and small basins. Those basins trap leaves and grit, and the wet rock above them can stay damp enough for algae to grow.

On a cleaning visit, we clear debris from feature basins we can reach, brush the wet surfaces around the feature, and look for scale on the lip where the water leaves. Like spillovers, waterfall edges can show white calcium lines in hard water. We note anything that looks like it is getting worse.

 

How Our Cleaning Visit Is Sequenced

The order matters. Brushing before vacuuming lets debris settle where we can remove it, and testing after cleaning gives a truer reading. Here is how our technicians typically work through a feature pool:

• 1. Skim the surface of the pool and spa so floating debris does not sink.

• 2. Brush from high to low: spillover lip, spa walls, tanning ledge, steps, then pool walls.

• 3. Clear feature basins and the umbrella sleeve.

• 4. Empty skimmer and pump baskets.

• 5. Vacuum what settled on the floor.

• 6. Test and balance the water.

• 7. Check the equipment and leave a detailed service slip.

The detailed service slip tells you what we did, what we added, and anything we noticed on the ledge, spa, or features. Our technicians are certified and background-checked, and our work is backed by our 100% Satisfaction Guarantee.

This sequence is the core of our swimming pool cleaning service in Chandler, and it is part of our weekly pool service. Weekly maintenance plans typically start around $95–$130/month, and we quote your pool after we see its features. You can also browse our pool services overview or learn more about our pool service in Chandler.

 

Chandler Pool Cleaning FAQs

Do tanning ledges need to be brushed every visit?

Yes, we brush the ledge on every visit. Shallow, sunny water is where algae often starts, and most automatic cleaners do not reach it well. Regular brushing keeps small spots from becoming a stain.

Why is there a white line on my spa spillover?

That line is usually calcium left behind when hard water evaporates off the lip. It builds slowly, a little at a time. Brushing and balanced water slow it down, and heavy scale may need a separate tile cleaning.

Should waterfalls run during cleaning?

We usually turn features off while we brush and clear the basins. That keeps debris from being stirred back up while we work. We turn them back on to check that water flows evenly before we leave.

How long does a full cleaning visit take on a pool with a spa?

It depends on the size of the pool, how many features you have, and how much debris is in the water. A pool with a spa and a ledge simply has more to brush than a pool without them. We plan each visit so the features get real attention, not a rushed pass.

 

 

Schedule Pool Cleaning in Chandler

If your ledge, spa, or waterfall never seems as clean as the rest of the pool, let us take a look. Call 602-460-2221 or contact our team for a free quote built around your pool’s features.

```